Plant Safety List
Plant Safety List:
Find the list of some of the essential safety items required for a process plant.
• The entire process plant should be covered with the fire hydrant system (This job is generally done by the safety dept. or by consultant.)
• At each floor DCP and CO2 extinguisher to be provided.
• Wherever applicable CO2 trolley to be provided.
• Wherever applicable sand buckets should be provided.
• Air breathing apparatus should be provided in the control room and at strategic location.
• Plant personnel should be equipped with proper PPE’s hand gloves, helmet, safety shoes, safety goggles, ear muff etc
• Bubble hood suit, safety shield, PVC suit, organic mask, dust mask etc should be provided.
• Gas monitors to be install at places where there is chances of gas leakage.
• Antidotes of the chemicals should be available.
• MSDS of the chemicals should be there.
• Eye washer and safety shower should be install at strategic locations.
• Wherever applicable safety valve or rupture disc to be provided.
• All the process vents should be connected to the scrubber.
• Chemical pit to be provided with a submersible pump.
• All the hot surfaces should be covered with insulation to avoid any injury.
• Fraight elevator should be operated with interlocking and audio and visual alarm.
• All the rotating equipments should be covered with guards.
• All the equipments should be earthed.
• Wherever applicable flame arrestor to be provided.
• Wherever applicable fume hood system to be install.
• All the ejectors vents should be provided outside the plant at safe place.
• All the process and utility lines should be properly supported.